Technology

Technical Specifications

Parameter    Specification

Substrates    42 alloy (Fe-Ni), copper alloy

Plating stack     Cu + Ni + Ag selective spot

Spot patterns      Single-spot, mini-spot, ring-spot, matrix-spot, stripe

Positioning method   Mechanical spot tool (pilot pin) / image-based alignment

Spot tolerance    ±125 μm (mechanical); ±50 μm class for high-density QFN; ±0.07 mm with image alignment

Silver thickness range    2.5–3.8 μm typical; up to ~9 μm depending on specification

Line speed   3.6–4.0 m/min standard; up to 12 m/min in high-speed configurations

Inspection    Inline thickness, visual defect, spot position

Line configuration      Standalone reel-to-reel or integration with existing plating line